10 Times Faster
The full-duplex data transfers capability allows the sending and receiving of data (at the same time) at 10 times faster than an equivalent card of USB 2.0 Standard. The maximum speed of USB 3.0 is 5Gbps, which enables the data transfer up to 25GB within a minute.
Supports 32 TB
Maximum addressable capacity 32TB via the USB 2.0 / USB 3.0 interfaces. Native 4KN Hard Drive Not Supported.
Powers off in synchronizatin with PC.
HDD X 8 (Supported)
All 8 HDDs are recognized when they are installed.
Comes with auto / manual modes & 3 levels of speed for best convention. Smart Fan functions:
Non-RAID: (Single Mode) Computer will show up as two independent drives. This function can be used if RAID is not required, if one HDD is installed or two different brands or capacities of HDD are installed.
Spanning concatenates multiple hard drives as a single large volume; resulting in a seamless expansion of virtual volumes beyond the physical limitations of separately connected hard drives. The data are written frim HDD1 to HDD8. RAID 0, JBOD Spanning Only, Non-Single JBOD
Striping is a method of concatenating multiple hard drives into one logical storage unit. It is the automated process of writing data across multiple drives simultaneously. Striping is used to increase the performance of disk reads. The multiple hard drives will write data in “column” effect. If one drive in a striped set fails, all of the data in the stripe set is lost.
RAID 50 combines multiple RAID 5 arrays with RAID 0 Striping. RAID 50 offers highest level of redundancy and performance. RAID 50 can sustain one to four drive failures while maintaining data integrity if each failed disk is in a different RAID 5 array. In RAID 50 the total addressable volume is 2 times the smallest layer of RAID 5 array. RAID 50 requires at least 6 Hard drives.
RAID 1 + 0
RAID 1+0 is mirrored(Raid 1) sets in a striped(Raid 0) set .
|Data Transfer Rate||
|Maximum HDD size||
|Multi-funtion LED displays||
|Product Weight & Dimensions||