10 Times Faster
The full-duplex data transfers capability allows the sending and receiving of data (at the same time) at 10 times faster than an equivalent card of USB 2.0 Standard. The maximum speed of USB 3.0 is 5Gbps, which enables the data transfer up to 25GB within a minute.
HDD X 2 (Supported)
All 2 HDDs are recognized when they are installed.
Native 4KN Hard Drive is Not Supported.
(8TB x4 * refer to Compatibility List)
Powers off in synchronizatin with PC.
Non-RAID: (Single Mode) Computer will show up as two independent drives. This function can be used if RAID is not required, if one HDD is installed or two different brands or capacities of HDD are installed.
RAID 0 – Spanning: Two HDDs will show up as one large single drive. Spanning is an array (not RAID) that is written sequentially across two drives.
RAID 0 MODE
RAID 0 – Striping: Two HDDs will show up as one large single drive but speed performance will boost up. The two HDDs will write Data in “column” effect. This form of array splits each piece of Data across both HDDs in segments. Data are store between first HDD and second HDD. While the HDD is stripe in writing, the next head of next HDD is move to next track to write. The Data is writing without any form of data-checking. Once one HDD is damaged and all data can be lost.
RAID 1 MIRRORING MODE
RAID 1– Mirroring: Using this mode will require 2 identical HDDs; meaning they must be the same capacity, brand and model number. Under RAID1, it will create an extra copy (or mirror) set of data to second drive. The backup data are more important for safe keeping and the available data only show up in one large single drive. This is useful when first HDD fails and it can be replaced by second set of identical data instantly.
|Data Transfer Rate||
|Maximum HDD size||
|Product Weight & Dimensions||